Skip to content

GIG2GIG-DW10

Products > Security - Surveillance - Control > 2Gig > GIG2GIG-DW10

Thin Door/Window Contact
Thin Door/Window Contact

This contact is meant for use with the 2GIG Alarm System and can be installed on doors, windows and many other objects that open and close. The sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away from or closer to the sensor. The sensor has an external input that accepts N/C dry contact devices. The sensor is also equipped with cover tamper for additional security. •Compact size, only 2 in. long •Fully supervised •Lithium battery with 5 years life •Reed sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical •12 Month Warranty Recessed Door Contact (2GIG-DW10-345) Wireless Signal Range: 350 ft., open air, with 2GIG Wireless Alarm Control Panel Code Outputs: Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery Transmitter Frequency: 345.000 MHz (crystal controlled) Transmitter Frequency Tolerance: 15 kHz Transmitter Bandwidth: 24kHz Modulation Type: Amplitude Shift Keying-On/Off Keying (ASK-OOK) Unique ID Codes: Over one (1) million different code combinations Supervisory Interval: 70 minutes Peak Field Strength: Typical 36,000 uV/m at 3m External Input Sampling Current: 20 uA External Input: Accepts N/C dry contact devices Reed Switch Magnetic Sensitivity: 10 to 20 amp turns Reed Sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical Magnet Type: Rare earth Magnet Dimensions (LxWxH): 1.3 x 0.435 x 0.312 in. (3.3 x 1.1 x 0.79 cm) Sensor Dimensions (LxWxH): 2.59 X 1.03 X 0.49 in. (6.58 x 2.62 x 1.24 cm) Weight (including battery & magnet): 1.1 oz. (31.2 g) Housing Material: ABS plastic Color: White Operating Temperature: 32 to 120F (0 to 49C) Relative Humidity: 5-95% Non-Condensing Battery (included): Two (2) Panasonic CR2032, or equivalent Lithium batteries Regulatory Listing(s): ETL, FCC Part 15, Industry Canada Warranty: Two (2) years Included Accessories: Two (2) Phillip’s flat-head screws, one (1) two-pin connector with a 12" flying 2-wire lead, adhesive strip

Login For Price