SONC6R
C Series C6R 93124 C Series extends the Sonance distributed audio line with a combination of value, aesthetics, and performance. Tweeter: 1" (25mm) cloth dome, Ferrofluid-cooled, pivoting Woofer: 6 1/2" (165mm) Polypropylene cone with a rubber surround Frequency Response: 50Hz - 20kHz ±3dB Impedance: 8 ohms nominal; 6 ohms minimum Power Handling: 5 watts minimum; 85 watts maximum Sensitivity: 88dB SPL (2.8V/1 meter) Shipping Weight: 9.4 lbs (4.3kg) pair
SONVP62R
Model VP62R 93012 Specifications: Tweeter: • 1" (25mm) cloth dome • Ferrofluid-cooled • Pivoting • In acoustic back chamber Woofer: 6-1/2" (165mm) textured polypropylene cone with a rubber surround Frequency Response: 45Hz - 20kHz ±3dB Impedance: • 8 ohms nominal • 6 ohms minimum Power Handling: • 5 watts minimum • 125 watts maximum Sensitivity: 89dB SPL (2.83V/1 meter) Grille: Perforated steel
SONVP62
Model VP62 93003 Features: Absolute Best Sonic Performance At All Price Points • Designed using state-of-the-art computer modeling software to vastly improve magnetic field and suspension linearity for consistent sonic performance at any SPL for best-in-class performance Latest High-Tech Driver And Tweeter Material Technology • Improved low frequency performance • Improved driver cone materials • Low diffraction woofer and tweeter design • Pivoting tweeter for improved frequency response in off-axis installations • Chambered tweeter design on all models The Chambered Tweeter Design Does The Following • Lowers the resonance frequency of the tweeter • Allows for a lower crossover frequency to the woofer • Reduces the back pressure on the tweeter dome • Reduces the distortion of the tweeter near the crossover frequency Easier To Install • Easier to access Roto-Lock screws • Removed metal hang tabs • One-piece paintable grille with peel and stick scrim cloth for easier painting • Two piece toggle feet allows installation with double dry wall and thicker ceiling and wall materials Specifications: Tweeter: • 1" (25mm) cloth dome • Ferrofluid-cooled • Pivoting • In acoustic back chamber Woofer: 6-1/2" (165mm) textured polypropylene cone with a rubber surround Frequency Response: 45Hz - 20kHz ±3dB Impedance: • 8 ohms nominal • 6 ohms minimum Power Handling: • 5 watts minimum • 125 watts maximum Sensitivity: 89dB SPL (2.83V/1 meter) Grille: Perforated steel
ITCSN62T-F2LGDC
StreetNode StreetNode 6250 PTP, part of the StreetNode V60-PTP series, is a mmWave all-outdoor native Ethernet radio operating in the license-free 60 GHz band that is specifically designed to meet the challenges of small-cell backhaul in urban areas and minimize deployment effort and cost. It can be installed on wall surfaces and lamp posts and be flexibly interconnected to form wireless backhaul network topologies that reach challenging small-cell locations and deliver best-in-class connectivity at street level. Its elegant design, compact size and availability in a variety of colors allow this radio to blend unobtrusively in the urban landscape. Featuring innovative “zero-touch” auto-alignment and provisioning (via Bluetooth - connected LCT), as well as, automatic channel interference scanning, StreetNode 6250 PTP accelerates street-level deployment, reducing the backhaul site costs significantly.
ITCUFX80A-HZAC
UltraLink-FX80 • Up to 3 Gbit/s full-duplex Ethernet throughput for delivering MEFcompliant Carrier Ethernet services. • High spectrum efficiency (with 256-QAM modulation). • Leading-industry system gain. • Support of three Gigabit Ethernet interfaces / one CPRI interface (CPRI Options 2 and 3). • Synchronous ETH and IEEE 1588v2 Transparent & Boundary Clock. • "Zero-touch" configuration and service provisioning through Bluetooth communication with a standard Android tablet. • IP/MPLS and SDN ready.
ITCUFX80A-LZAC
UltraLink-FX80 • Up to 3 Gbit/s full-duplex Ethernet throughput for delivering MEFcompliant Carrier Ethernet services. • High spectrum efficiency (with 256-QAM modulation). • Leading-industry system gain. • Support of three Gigabit Ethernet interfaces / one CPRI interface (CPRI Options 2 and 3). • Synchronous ETH and IEEE 1588v2 Transparent & Boundary Clock. • "Zero-touch" configuration and service provisioning through Bluetooth communication with a standard Android tablet. • IP/MPLS and SDN ready.