This contact is meant for use with the 2GIG Alarm System and can be installed on doors, windows and many other objects that open and close. The sensor transmits signals to the control panel when a magnet mounted near the sensor is moved away from or closer to the sensor. The sensor has an external input that accepts N/C dry contact devices. The sensor is also equipped with cover tamper for additional security.
•Compact size, only 2 in. long
•Fully supervised
•Lithium battery with 5 years life
•Reed sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical
•12 Month Warranty
Recessed Door Contact (2GIG-DW10-345)
Wireless Signal Range: 350 ft., open air, with 2GIG Wireless Alarm Control Panel
Code Outputs: Alarm; Alarm Restore; External Alarm; External Restore; Tamper; Tamper Restore; Supervisory; Low Battery
Transmitter Frequency: 345.000 MHz (crystal controlled)
Transmitter Frequency Tolerance: 15 kHz
Transmitter Bandwidth: 24kHz
Modulation Type: Amplitude Shift Keying-On/Off Keying (ASK-OOK)
Unique ID Codes: Over one (1) million different code combinations
Supervisory Interval: 70 minutes
Peak Field Strength: Typical 36,000 uV/m at 3m
External Input Sampling Current: 20 uA
External Input: Accepts N/C dry contact devices
Reed Switch Magnetic Sensitivity: 10 to 20 amp turns
Reed Sensitivity: 0.625 in. (1.59 cm) minimum gap, 0.85 in. (2.16 cm) typical
Magnet Type: Rare earth
Magnet Dimensions (LxWxH): 1.3 x 0.435 x 0.312 in. (3.3 x 1.1 x 0.79 cm)
Sensor Dimensions (LxWxH): 2.59 X 1.03 X 0.49 in. (6.58 x 2.62 x 1.24 cm)
Weight (including battery & magnet): 1.1 oz. (31.2 g)
Housing Material: ABS plastic
Color: White
Operating Temperature: 32 to 120F (0 to 49C)
Relative Humidity: 5-95% Non-Condensing
Battery (included): Two (2) Panasonic CR2032, or equivalent Lithium batteries
Regulatory Listing(s): ETL, FCC Part 15, Industry Canada
Warranty: Two (2) years
Included Accessories: Two (2) Phillip's flat-head screws, one (1) two-pin connector with a 12" flying 2-wire lead, adhesive strip